A quick history of the original Shelby GT500
The 1967 GT500 is where it all began, but the storied model’s reign was not long
Ford’s partnership with Carroll Shelby is the stuff of legend and is now a major motion picture, coming soon to a multiplex near you. But it focuses on a very different aspect of Shelby’s role within Ford: racing. Specifically against Ferrari and the rest of the field at Le Mans, in cars that Ford was developing for the first time.
The other side of Shelby’s relationship with Ford would be called “tuning” today, and the GT500 played an early, and very important role in Shelby’s history as a builder of performance machines.
But the GT500 was not the first Mustang modified by Shelby’s operation: that honor goes to the 1965 GT350 and the GT350R. The “basic” GT350 dialed up the Mustang’s output by 35 hp, up to 306 hp, courtesy of a 289 CID K-Code engine, while also offering modified steering, a functional hood scoop and 15-inch wheels wearing low-angle Goodyear tires. A beefier rear axle from the Ford Galaxie was standard, as were Koni adjustable shock absorbers and Kelsey-Hayes front disc brakes. The early cars were also a little hard to drive, with a clutch that could be described as heavy. The GT350R dialed up the output even further, up to 360 hp, but only 34 examples of this model were made.
“Ford supplied the new Mustangs with V8 engines and mostly automatic transmissions, Shelby added extra performance and style and Hertz gave the public access to a unique driving experience through what was known then as its new ‘Rent-A-Racer’ program,” Ford said.
1,001 examples of the GT350H were produced for Hertz, and of course were later acquired by enthusiasts. The ones that weren’t wrecked by car renters, anyway.
The GT500 that debuted for 1967 was a different beast from those earlier models.
For one thing, it was powered by a 428 CID engine with two 600-CFM Holley carburetors, rated at 355 hp and 420 lb-ft of torque, paired with a choice of a four-speed manual or a three-speed automatic. The engine itself also featured a cast aluminum intake manifold. Actually, there were two engine options for the GT500 for 1967 — the other was Ford’s 427 CID V8 that was quite a bit more expensive than the Shelby-modified 428 CID unit.
In the cockpit the GT500 also received an upgraded 140-mph speedometer, an 8,000-rpm tach and a couple of other additional gauges. But the biggest and the most noticeable change, and also one of the most practical, safety-wise, was the roll bar. Badging was relatively light on the inside: Cobras appeared on the passenger-side dash as well as the three-spoke steering wheel trimmed in wood. There were plenty of other opportunities to advertise the car’s performance on the outside, with Cobra badging along with a rocker stripe. Buyers had three options when it came to wheels, and all were 15 inches in diameter — this was in the age of smaller wheels.
A bigger engine wasn’t the only mechanical change: Shelby fitted stiffer front springs to Ford’s stock suspension, an upgraded anti-roll bar and Gabriel shock absorbers. The GT500 also featured front disc brakes as standard equipment, which would come in useful for a lot of owners.
One would think that 355 hp and 420 lb-ft of torque would be enough to satisfy all customers seeking a faster Mustang, but halfway through 1968 Shelby offered the GT500KR, which stood for “King of the Road.”
Powered by the new 428 CID Cobra Jet V8 engine with a single 735-CFM Holley four-barrel carburetor with a ram air system, this engine received an upgraded camshaft, reworked cylinder heads and connecting rods and an upgraded crankshaft. The output, at least officially, was still 355, but in reality it was well over the 400-hp mark.
The reign of the original GT500 cars was not long: Shelby’s relationship with Ford began to fray by 1969, as Shelby sought to move on to personal projects. 1969 was really the final year for the first-generation versions of the Shelby GT500, even though several hundred unsold examples from that year were later reworked by Ford into 1970 model year cars. And for a long time, Shelby and Ford closed the book on the GT500 nameplate.
Only decades later, Ford brought back the GT500 nameplate in 2005 with the model entering production two years later.